Panasonic

TOUGHBOOK Support | Download and FAQs

/dl/docs/14043
Top > Search Results > Detail Page
Category:
  • FAQ

Title: In the case of clean installation of Windows XP For CF-19K/L/M(mk3)
Model:
CF-19K/L/M(mk3)
Operating System: Windows XP
Language:
Release Date: Feb 17, 2009
Question
In the case of clean installation of Windows XP 
Answer
In the case of clean installation of Windows XP
[Preparation]
-Floppy Disk Drive
-1 Floppy Disk (3.5 inch FDD 1.44 bite format)
-f6fd_8_5_0_1032_d081084.exe file
* In the case of CF-19K/L/M(mk3) download "f6fd_8_5_0_1032_d081084.exe"
from the Panasonic Website
(https://pc-dl.panasonic.co.jp/public/soft_first/cf-19_os/f6fd_8_5_0_1032_d081084.exe)
When f6fd_8_5_0_1032_d081084.exe is downloaded‚ and executed‚ several files are made.
[Making of Driver Floppy Disk]
-Insert the floppy disk in the floppy disk drive. Please copy the made file onto the floppy disk.
[Installation of Windows XP](English)
1.Set the floppy disk drive and insert the floppy disk made in the [Making of Driver Floppy Disk] to it.
The floppy disk will be used for the installation‚ so please do NOT remove it.
2.Insert the installation CD of Windows XP and boot up the computer.
* Unless it is CD-ROM of the Windows XP SP2 application being
  completed‚the blue back occurs at last stage of boot.
3.When the following "Press F6 if you need to install a third party SCSI and RAID driver…" message is
displayed in the lower part of the screen‚ press "F6" key.
(The message will have been displayed only while the "F6" key is effective.)

In the case that "F6" key could not be clicked‚ reboot the computer.
4.When the following message is displayed‚ press "S" to continue processing. (*)

(*) The key pressed is different by the language.
(Ex: English - S‚ German - Z)
Follow the indication in the lower part of this screen. (S=Specify Additional Device in English)
5.When the page below is displayed‚ choose your applicable driver‚ using "↑" and "↓" key.
In the case of CF-19K/L/M(mk3) choose "IntelR ICH9M-E/M SATA AHCI Controller"
and press "Enter" to install it.
6.The message "Setup will load support for the following mass storage device(s):" is displayed in the next page.
Confirm the driver chosen in the No.5 is displayed in the following line and press "Enter" key.
7.An installation begins as usual afterwards.
Follow the instruction in that page.
* Continue installing it with the floppy disk inserted in order to copy the contents of the floppy disk.
(If there is no floppy disk in it‚ the instruction to insert it is displayed.)
Index No: 014043
Window closed

Return to Top