NOTE
- Do not repeatedly press the keys in quick succession.
- Do not use the key combinations together with touch pad (external mouse), screen, tablet buttons, or other key operations.
- Do not use the key combinations before you log on to Windows. Wait until the drive indicator turns off. On the Setup Utility screen, you can use the key combinations of «Fn» + «F1», «Fn» + «F2» and «Fn» + «F3».
- The key combinations may not work with some applications.
- The pop-up display shown in the table below appears after logging on to Windows. It may not appear in some application conditions.
*1 : These key combinations are disabled when [Concealed Mode] is enabled.
*2 : You can also turn on/off the Concealed Mode by pressing «F8» or right «Alt».
Change the [Trigger Key] setting in the submenu of [Concealed Mode Configuration] in the [Main] menu of the Setup Utility.
Hotkey Settings
You can make 2 settings:
- Fn key lock
When you press «Fn», the key is locked (pressed-down) until you press another key. Use this when pressing difficult key combinations.
- Pop-up icon on/off (For Windows 7)
- Start up the Hotkey Settings.
Display [All apps], and then click [Hotkey Settings] under “Panasonic”.
To display [All apps], proceed as follows on the Start screen.
- Right-click any empty location on the Start screen.
- Click [All apps] on the toolbar.
Click (Start) - [All Programs] - [Panasonic] - [Hotkey Settings].
- Make the settings.
[Use Fn key lock]
[Notification]
[Make sounds when Fn key is pressed] *3
[Show status on screen]: Displays the Fn key status when on the notification area is clicked.
- : «Fn» is locked.
- : «Fn» is not locked.
[Disable popup]
The pop-up icon will not be displayed.
[Display status bar while Fn Key is held down]
[Status bar position]: If you select [Top], the status bar will be displayed near upside of the computer.
If you select [Bottom], the status bar will be displayed near downside of the computer.
- Click [OK].
NOTE
- You can have different settings for each user.
*3 : If the speaker is muted or [Sound] is turned off in [Concealed Mode Configuration], beeps do not sound.
|